The DES-1016D 16-Port Fast Ethernet Unmanaged Desktop Switch is designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
Ideal for Basic Networking Tasks
With the D-Link DES-1016D, you can easily expand your network by adding more computers or devices with speeds up to 200 Mbps per port in full-duplex mode.
Auto-Sensing 10/100 Ports
The DES-1016D use auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to 10 or 100 Mbps devices to create an integrated network. Each port automatically adjusts for straight-through or crossover cables to make the right link.
Flow Control for Secure Transmission
802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full.
Quality of Service (QoS)
The switches provide 802.1p priority queues for QoS, allowing users to run bandwidth-sensitive applications such as multimedia and VoIP Internet telephone without data flow bottlenecks that can degrade the quality of the network connection.
Save on Energy Costs
The switches support IEEE802.3az EEE which enables the switches to reduce power consumption when the switches are at low utilization, allowing users to save on power usage and costs. During these periods of low utilization, the switches can enter a low-power state and use up less power than regular operations.
The DES-1016D 16-Port Fast Ethernet Unmanaged Desktop Switch is designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.Ideal for Basic Networking TasksWith the D-Link DES-1016D, you can easily expand your network by adding more computers or devices with speeds up to 200 Mbps per port in full-duplex mode.Auto-Sensing 10/100 PortsThe DES-1016D use auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to 10 or 100 Mbps devices to create an integrated network. Each port automatically adjusts for straight-through or crossover cables to make the right link.Flow Control for Secure Transmission802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full.Quality of Service (QoS)The switches provide 802.1p priority queues for QoS, allowing users to run bandwidth-sensitive applications such as multimedia and VoIP Internet telephone without data flow bottlenecks that can degrade the quality of the network connection.Save on Energy CostsThe switches support IEEE802.3az EEE which enables the switches to reduce power consumption when the switches are at low utilization, allowing users to save on power usage and costs. During these periods of low utilization, the switches can enter a low-power state and use up less power than regular operations.
Dimensions
Width |
280 mm |
Height |
44 mm |
Depth |
125.8 mm |
Data Transfer Rates
Ethernet |
10 Mbps (half duplex) 20 Mbps (full duplex) |
Fast Ethernet |
100 Mbps (half duplex) 200 Mbps(full duplex) |
Netwrok Cables
10BASE-T |
UTP CAT 3/4/5/5e (100 m max.) EIA/TIA-586 100-ohm STP (100 m max.) |
10BASE-TX |
UTP CAT 5/5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.) |
Packet Filtering /Forwarding Rates (half duplex)
Ethernet |
14,880 pps per port |
Fast Ethernet |
148,800 pps per port |
Power Consumption
Power On(Standby) |
DC input: 0.61 Watts AC input: 1.19 Watts |
Max. |
DC input: 1.55 Watts AC input: 2.89 Watts |
Power Input |
100~240 V AC 50/60 Hz internal universal power supply |
Heat Dissipation
Power On (Standby) |
AC input: 4.06 BTU/h |
Maximum |
AC input: 9.86 BTU/h |
Environment
Operating Temperature |
0 deg to 40 deg C (32 deg to 104 deg F) |
Storage Temperature |
-10 deg to 70 deg C (14 deg to 158 deg F) |
Operating Humidity |
10% to 90% RH non-condensing |
Storage Humidity |
5% to 90% RH non-condensing |
Standards
IEEE 802.3 10BASE-T Ethernet (twistedpair copper) |
IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) |
ANSI/IEEE 802.3 NWay Auto-Negotiation |
IEEE 802.3x Flow Control |
IEEE 802.3az EEE function |
LED Indicators
Per port |
Link/Activity |
Per device |
Power |
Others
Switching Fabric |
3.2 Gbps |
Protocol |
CSMA/CD |
Number of Ports |
16 10/100Mbps Fast Ethernet ports |
Topology |
Star |
Media Interface Exchange |
Auto MDI/MDIX adjustment for all ports |
Transmission Method |
Store-and-forward |
MAC Address Table |
8K entries per device |
MAC Address Learning |
Automatic update |
RAM Buffer |
256 Bytes(2M bits) |
MTBF |
2,266,559 hours |
Certifications
FCC Class A, ICES-003 Class A, CE Class A, C-Tick Class A, VCCI Class A, cUL, LVD |
Warranty
3 Years Manufacturer Warranty |
Disclaimer
Product will be delivered for all urban areas serviceable by major courier agencies. For remote/rural areas the product will be sent by local couriers / Indian Speed Post and may take little more time. |
No Deliveries on Sunday and National Holidays. |
- Inexpensive Fast Ethernet solution for SOHO/SMB
- Auto MDI/MDIX crossover for all ports
- Store-and-forward switching scheme
- Full/half-duplex for Ethernet/Fast Ethernet speeds
- IEEE 802.3x Flow Control
- Plug-and-play installation
Be the first one to review this product